CVE-2010-5330 — On certain Ubiquiti devices, Command Injection exists via a GET request to stain

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, an

01What is this vulnerability?

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

02Affected products

No structured affected-product list available — see references below for vendor advisories.

03Active exploitation status

Yes — actively exploited. Added to the CISA KEV catalog on —.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Open the Sigma generator with a pre-filled prompt for this CVE to draft a starting detection in your stack of choice:

Open in Sigma generator →

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2019-06-11 (7 years ago)
• Last modified: 2025-11-05

09References

No additional references available in the KB record.