CVE-2018-0057 — On MX Series and M120/M320 platforms configured in a Broadband Edge (BBE) enviro

On MX Series and M120/M320 platforms configured in a Broadband Edge (BBE) environment, subscribers logging in with DHCP Option 50 to request a specific IP address will be assigned the requested IP address, even if there is a static MAC to IP address binding in the access profile.

01What is this vulnerability?

On MX Series and M120/M320 platforms configured in a Broadband Edge (BBE) environment, subscribers logging in with DHCP Option 50 to request a specific IP address will be assigned the requested IP address, even if there is a static MAC to IP address binding in the access profile. In the problem scenario, with a hardware-address and IP address configured under address-assignment pool, if a…

02Affected products

Vendor	Product	Versions
Juniper Networks	Junos OS	15.1, 16.1, 16.2, 17.1, 17.2, 17.3, 17.4, 18.1

03Active exploitation status

Not currently listed on the CISA Known Exploited Vulnerabilities (KEV) catalog. EPSS is the best forward-looking signal — see the EPSS row above.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Open the Sigma generator with a pre-filled prompt for this CVE to draft a starting detection in your stack of choice:

Open in Sigma generator →

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2018-10-10T18:00:00.000Z
• Last modified: 2024-09-17T02:10:54.305Z

09References

• kb.juniper.net — https://kb.juniper.net/JSA10892