CVE-2018-10603 — Martem TELEM GW6 and GWM devices with firmware 2018

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

01What is this vulnerability?

Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior do not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.

02Affected products

Vendor	Product	Versions
Martem	TELEM GW6	2018.04.18-linux_4-01-601cb47 and prior
Martem	TELEM GWM	2018.04.18-linux_4-01-601cb47 and prior

03Active exploitation status

Not currently listed on the CISA Known Exploited Vulnerabilities (KEV) catalog. EPSS is the best forward-looking signal — see the EPSS row above.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Ask SARA in chat to draft a starting detection for this CVE in your stack of choice.

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2018-07-31T17:00:00.000Z
• Last modified: 2024-09-17T00:21:23.117Z

09References

• ics-cert.us-cert.gov — https://ics-cert.us-cert.gov/advisories/ICSA-18-142-01
• www.securityfocus.com — http://www.securityfocus.com/bid/104286