CVE-2018-19982 — An issue was discovered on KT MC01507L Z-Wave S0 devices

An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same netw

01What is this vulnerability?

An issue was discovered on KT MC01507L Z-Wave S0 devices. It occurs because HPKP is not implemented. The communication architecture is APP > Server > Controller (HUB) > Node (products which are controlled by HUB). The prerequisite is that the attacker is on the same network as the target HUB, and can use IP Changer to change destination IP addresses (of all packets whose destination IP address is…

02Affected products

Vendor	Product	Versions
n	a / n/a	n/a

03Active exploitation status

Not currently listed on the CISA Known Exploited Vulnerabilities (KEV) catalog. EPSS is the best forward-looking signal — see the EPSS row above.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Ask SARA in chat to draft a starting detection for this CVE in your stack of choice.

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2018-12-09T19:00:00.000Z
• Last modified: 2024-08-05T11:51:17.966Z

09References

• github.com — https://github.com/min1233/CVE/blob/master/1