CVE-2020-10284 — No authentication is required to control the robot inside the network, moreso th

No authentication is required to control the robot inside the network, moreso the latest available user manual shows an option that lets the user to add a password to the robot but as in xarm_studio 1.3.0 the option is missing from the menu. Assuming manual control, even by force

01What is this vulnerability?

No authentication is required to control the robot inside the network, moreso the latest available user manual shows an option that lets the user to add a password to the robot but as in xarm_studio 1.3.0 the option is missing from the menu. Assuming manual control, even by forcefully removing the current operator from an active session.

02Affected products

Vendor	Product	Versions
uFactory	xArm5 Lite, xArm 6 and xArm 7	v1.5.0 and before

03Active exploitation status

Not currently listed on the CISA Known Exploited Vulnerabilities (KEV) catalog. EPSS is the best forward-looking signal — see the EPSS row above.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Ask SARA in chat to draft a starting detection for this CVE in your stack of choice.

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2020-07-15T19:25:13.961Z
• Last modified: 2024-09-16T23:21:30.074Z

09References

• www.ufactory.cc — https://www.ufactory.cc/#/en/support/download/xarm