CVE-2023-7017 — Sciener locks' firmware update mechanism do not authenticate or validate firmwar

Sciener locks' firmware update mechanism do not authenticate or validate firmware updates if passed to the lock through the Bluetooth Low Energy service. A challenge request can be sent to the lock with a command to prepare for an update, rather than an unlock request, allow

01What is this vulnerability?

Sciener locks' firmware update mechanism do not authenticate or validate firmware updates if passed to the lock through the Bluetooth Low Energy service. A challenge request can be sent to the lock with a command to prepare for an update, rather than an unlock request, allowing an attacker to compromise the device.

02Affected products

Vendor	Product	Versions
Sciener	Kontrol Lux	6.5.x

03Active exploitation status

Not currently listed on the CISA Known Exploited Vulnerabilities (KEV) catalog. EPSS is the best forward-looking signal — see the EPSS row above.

04Recommended remediation

• Patch to a fixed version listed in the vendor advisory (see references below).
• Mitigate with WAF rules, network egress filters, or feature flags where the patch is not yet available.
• Hunt historical logs for exploitation indicators — see Detection signatures below.

05Technical details

For the full vendor write-up, exploit chains, and reference implementations, see the references list in section 09.

06Detection signatures

Ask SARA in chat to draft a starting detection for this CVE in your stack of choice.

07Related CVEs

No directly-cited follow-up CVEs in the KB record for this advisory. The references list in section 09 carries the vendor cross-references.

08Timeline

• Published: 2024-03-15T17:07:28.081Z
• Last modified: 2025-11-04T18:22:12.788Z

09References

• alephsecurity.com — https://alephsecurity.com/2024/03/07/kontrol-lux-lock-2/